CONFERENCE PROGRAM |
Download Program  |
Preliminary Program
| Computer Aided Engineering in Additive Manufacturing |
| Oster, Alexander (Autodesk Inc., United States of America) Practical process simulation for metal Additive Manufacturing |
| Bayerlein, Fabian; Zeller, Christian; Zäh, Michael F. (Technical University of Munich, Germany) Reduction of manufacturing-induced dimensional deviations in laser beam melting by pre-deformation |
| Bernard, Paul-Emile (1); Barboza, Josue (1); Delanaye, Michel (1); Remacle, Jean-François (2) (1: Geonx, Belgium; 2: Université catholique de Louvain, Belgium) Additive Manufacturing simulation on GPU using high-order finite elements on cartesian grids |
| Soldner, Dominic (1,2); Steinmann, Paul (1,2); Mergheim, Julia (1,2) (1: Chair of Applied Mechanics (LTM), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Reducing computational cost of the simulation of selective laser melting of PA12 |
| Kergaßner, Andreas (1,2); Mergheim, Julia (1,2); Steinmann, Paul (1,2)(1: Chair of Applied Mechanics (LTM), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Mesoscopic modelling of additively manufactured Inconel 718 |
| Atzeni, Eleonora; Galati, Manuela; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro (Politecnico di Torino, Department of Management and Production Engineering (DIGEP), Italy) Redesign for AM of a metal component through topology optimization: a case study |
| Koepf, Johannes (1,2); Rai, Abha (1,2); Markl, Matthias (1,2); Körner, Carolin (1,2) (1: Chair of Materials Science and Engineering for Metals (WTM), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) 3D grain structure simulation for beam - Based Additive Manufacturing |
| Bruna-Rosso, Claire; Demir, Ali Gökhan; Previtali, Barbara; Vedani, Maurizio (Dipartimento di Meccanica, Politecnico di Milano, Italy) Selective laser melting high efficiency modeling |
| Greifenstein, Jannis (1,2); Stingl, Michael (1,2) (1: Mathematical Optimization, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Robust optimal component design under consideration of local material defects |
| Major, Zoltan; Sheikhnejad-Bishe, Ommeaymen (Institute of Polymer Product Engineering Johannes Kepler Universität Linz, Austria) Simulation of the electromechanical behavior of nanoparticles filled ink for 3D-printing |
| Schiochet Nasato, Daniel (1,3); Pöschel, Thorsten (1,3); Parteli, Eric J. R. (2,3) (1: Institute for Multiscale Simulation (MSS), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Department of Geosciences, University of Cologne, Germany; 3: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Effect of vibrations applied to the transport roller in the quality of the powder bed during additive manufacturing |
| Education and Arts & Design for Additive Manufacturing |
| Gräßler, Iris (1,2); Taplick, Patrick (1,2) (1: Heinz Nixdorf Institute - Paderborn University, Germany; 2: Direct Manufacturing Research Center, Germany) Supporting Additive Manufacturing by augmented reality |
| Abattouy, Mohammed (Faculty of sciences and technologies Tangier, Morocco) Additive manufacturing laboratory inside Moroccan universities: a case study |
| Major, Zoltan; Reiter, Martin (Institute of Polymer Product Engineering Johannes Kepler Universität Linz, Austria) Education of 3D printing and design for various ages and expertise levels |
| Havenga, Sarel Pretorius (1); de Beer, Deon (2); van Tonder, Malan (1); Campbell, Ian (3) (1: Vaal University of Technology, South Africa; 2: North West University, South Africa; 3: Loughborough University, United Kingdom) Using acetone (propanone) as a post-production finishing technique: Crossing the divide between art and technology |
| Materials for Additive Manufacturing - Metals |
| Bauer, Thomas (1); Spierings, Adriaan B. (1); Wegener, Konrad (2) (1: Inspire AG, Switzerland; 2: ETH Zürich, Switzerland) Effect of minor element additions to the processability of a nickel-based anti-magnetic shielding alloy |
| Sehrt, Jan T. (1); Kleszczynski, Stefan (1); Notthoff, Christian (2); Lau, Marcus (3); Barcikowski, Stephan (3) ) (1: University of Duisburg-Essen, Institute for Product Engineering, Manufacturing Technology, Germany; 2: University of Duisburg-Essen, Institute for Combustion and Gasdynamics, Nanoparticle Process Technology and Center for Nanointegration Duisburg-Essen (CENIDE), Germany; 3: University of Duisburg-Essen, Technical Chemistry I and Center for Nanointegration Duisburg-Essen (CENIDE), Germany) Laser powder bed fusion of nano-WC-modified and nano-TiO2-modified metal powders |
| Karg, Michael Cornelius Hermann (1,2,3); Ahuja, Bhrigu (1,2,3); Schmidt, Michael (1,2,3) (1: Institute of Photonic Technologies (LPT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 3: Erlangen Graduate School in Advanced Optical Technologies (SAOT), Germany) In-situ creation of Aluminium-Copper alloys from powder mixtures of micro-scaled master alloys and dry coated nanoparticles during Additive Manufacturing by laser beam melting |
| Khademzadeh, Saeed (1); Carmignato, Simone (1); Bariani, Paolo F. (1); Parvin, Nader (2) (1: University of Padova, Italy; 2: Amirkabir University of Technology (Tehran Polytechnic), Iran) Textural evolution during micro direct metal deposition of NiTi alloy |
| v. Müller, Alexander (1,2); Schlick, Georg (3); Anstätt, Christine (3); de Luca, Riccardo (1); Neu, Rudolf (1,2); Seidel, Christian (3); You, Jeong-Ha (1) (1: Max-Planck-Institut für Plasmaphysik, Germany; 2: Technische Universität München, Germany; 3: Fraunhofer IGCV, Germany) Microstructural investigations of tungsten manufactured by means of laser beam melting |
| Dutta Majumdar, Jyotsna (1); Rittinghaus, Silja Katharina (2,3); Weisheit, Andreas (3) (1: Indian Institute of Technology Kharagpur, India; 2: Lehrstuhl für Lasertechnik LLT RWTH Aachen University, Aachen, Germany; 3: Fraunhofer-Institut für Lasertechnik ILT, Aachen, Germany)
Studies on direct laser clad Ti45Al5Nb0.5Si-TiB2 composites |
| Karg, Michael Cornelius Hermann (1,5,6); Hentschel, Oliver (1,5,6); Ahuja, Bhrigu (1,5,6); Junker, Daniel (2,6); Hassler, Ulf (3,6); Schäperkötter, Claus Simon (4,6); Haimerl, Andreas (4,6); Arnet, Horst (4,6); Merklein, Marion (2,6); Schmidt, Michael (1,5,6) (1: Institute of Photonic Technologies (LPT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Institute of Manufacturing Technology (LFT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 3: Fraunhofer IIS/EZRT, Germany; 4: Schaeffler Technologies AG & Co. KG, Germany; 5: Erlangen Graduate School in Advanced Optical Technologies (SAOT), Germany; 6: Bayerischer Forschungsverbund ForNextGen - Next Generation Tooling, Germany) Comparison of process characteristics and resulting microstructures of maraging steel 1.2709 in Additive Manufacturing via Laser Metal Deposition and Laser Beam Mealting in Powder Bed |
| Materials for Additive Manufacturing - Polymers |
| Carvalho, A.S.V. (1); Luis, J. (1); Pires, L.S.O. (1,2); Oliveira, J. M. (1,2) (1: School of Design, Management & Production Technologies Northern Aveiro, University of Aveiro, Oliveira de Azeméis, Portugal ; 2: CICECO-Aveiro Institute of Materials, University of Aveiro, Portugal) Development of industrial ceramic pastes for robocasting 3D |
| Schönberger, Frank; Fage, Julien; Knieper, Alexander; Klumpp, Alexander; Beinert, Christian (Fraunhofer LBF, Germany) Design of novel copolymers for compact and non-porous 3D inkjet printing |
| Schmutzler, Christoph; Doerrstein, Jörg; Zaeh, Michael F. (Technical University Munich, Germany) Manufacturing of components by 3D printing using biological waste products |
| Gomez, Juan (1,2); Sachs, Marius (1,2); Schmidt, Jochen (1,2); Peukert, Wolfgang (1,2) (1: Institute of Particle Technology (LFG), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Tailoring properties of polypropylene powders for LBM applications using dry particle coating |
| Dörrstein, Jörg; Langhansl, Matthias; Zollfrank, Cordt (Technische Universität München, Professur für Biogene Polymere, Germany) Modeling of the actuation potential of 3D-printed PLA-Cellulose composites |
| Kollmer, Jürgen (1); Dorfinger, Peter (1); Gorsche, Christian (2); Seidler, Konstanze (2); Liska, Robert (2); Stampfl, Jürgen (1) (1: Institute of Materials Science and Technology, TU Wien, Austria; 2: Institute of Applied Synthetic Chemistry, TU Wien, Austria) Toughening and coloring of photopolymers for lithography-based 3D-printing |
| Fanselow, Stephanie (1,2); Peukert, Wolfgang (1,2); Schmidt, Jochen (1,2) (1: Institute of Particle Technology (LFG), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Production of polymer agglomerates by spray drying |
| Leitner, Ulrich; Heiden, Bernhard (FH-Kärnten Gemeinnützige Privatstiftung, Austria) 3D-Printing with coated materials - first experimental investigations and design considerations |
| Medical Applications of Additive Manufacturing |
| Kostevšek, Urška (1); Brajlih, Tomaž (1); Balič, Jože (1); Kadivnik, Žiga (2); Drstvenšek, Igor (1) (1: University of Maribor, Slovenia; 2: Ortotip Ltd. Maribor, Slovenia) Research on achievable manufacturing speeds of selective laser melting in dental applications |
| Rajtukova, Viktoria (1); Toth, Teodor (1); Polacek, Irenej (1); Hudak, Radovan (1); Zivcak, Jozef (1); Kovacevic, Mila (2) (1: Technical University of Kosice, Slovak Republic; 2: University of Novi Sad, Serbia) The comparison of internal surfaces of Ti-6Al-4V alloy and CoCr alloy frameworks for single crowns using SLM technology |
| Schnitzer, Marek; Hudák, Radovan; Živčák, Jozef; Kula, Tomas; Bocko, Jozef (Technical University of Kosice, Slovak Republic) Cervical implant design, structural analysis, topological optimization and experimental verification |
| Wessarges, Yvonne; Gieseke, Matthias; Kiesow, Tobias; Kaierle, Stefan (Laser Zentrum Hannover e.V., Germany) Selective Laser Melting of magnesium alloys for biomedical applications |
| Jiang, Cho-Pei (1); Hsu, Huang-Jan (2); Lee, Shyh-Yuan (3) (1: National Formosa University, Taiwan; 2: National Yang-Ming University, Taiwan; 3: National Yang-Ming University, Taiwan) LCD-based Additive Manufacturing of dental model and occlusal splint |
| Velasco, Marco Antonio (1); Garzón-Alvarado, Diego Alexander (2); Rodríguez, Jhonatan (3); Restrepo, Deivi Gonzalo (3) (1: Servicio Nacional de Aprendizaje SENA, Colombia; 2: Universidad Nacional de Colombia, Colombia; 3: Universidad Santo Tomás, Colombia) Evaluation of the mechanical properties of PLA scaffolds for bone tissue engineering as a function of the process parameters in fused filament fabrication (FFF) |
| Major, Zoltan (1); Berger, Veronika M. (1); Nussbaum, Gerhard (2); Ernst, Waltraud (3) (1: Institute of Polymer Product Engineering, Johannes Kepler Universität Linz, Austria; 2: Kompetenznetzwerk Informationstechnologie zur Förderung der Integration von Menschen mit Behinderungen (KI-I), Linz, Austria; 3: Institut für Frauen- und Geschlechterforschung, Johannes Kepler Universität Linz, Austria) A new approach to mouthsticks - Material selection for Additive Manufacturing of mouthpieces |
| Homa, Johannes; Schwentenwein, Martin (Lithoz GmbH, Austria) Novel AM concepts for biomedical applications |
| Additive Manufacturing Process - Metals |
| Calignano, Flaviana (1); Monaco, Federico (2); Calandri, Michele (3); Marchese, Giulio (3); Ambrosio, Elisa Paola (1); Lorusso, Massimo (1); Manfredi, Diego (1); Ugues, Daniele (3) (1: Center for Sustainable Futures (CSF) - Fondazione Istituto Italiano di Tecnologia (IIT), Italy; 2: Department of Energy (DENERG) - Politecnico di Torino, Italy; 3: Department of Applied Science and Technology (DISAT) -Politecnico di Torino, Italy) Selective laser melting for heat exchanger |
| Atzeni, Eleonora; Galati, Manuela; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro (Politecnico di Torino, Department of Management and Production Engineering (DIGEP), Italy) An integrated design methodology for components produced by Selective Laser Melting (SLM) |
| Scheitler, Christian (1,2); Rothfelder, Richard (1); Rasch, Michael (1,2); Ahuja, Bhrigu (1,2); Schmidt, Michael (1,2,5); Merklein, Carsten (3); Beer, Oskar (4) (1: Institute of Photonic Technologies (LPT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Erlangen Graduate School in Advanced Optical Technologies (SAOT), Germany; 3: Schaeffler Technologies AG & Co. KG, Germany; 4: FAG Aerospace GmbH & Co. KG, Germany; 5: Bayerisches Laserzentrum GmbH (blz), Germany) Laser beam melting of M50NiL: Influence of inert gas flow on resulting part properties |
| Li, Xiaopeng (1); Kruth, Jean-Pierre (1); Van Humbeeck, Jan (2) (1: University of Leuven (KU Leuven), Department of Mechanical Engineering, Leuven, Belgium; 2: University of Leuven (KU Leuven), Department of Metallurgy and Materials Engineering, Leuven, Belgium) The influence of preheating temperature on the phase formation and texture of commercially pure titanium fabricated by selective laser melting |
| Schwanekamp, Tobias; Reuber, Martin (Rheinische Fachhochschule Köln, Germany) Additive Manufacturing of application optimized composite carbide precision tools |
| Bischof, Corinna (1,2); Scheitler, Christian (1,2); Kneisel, Lukas (1); Schmidt, Michael (1,2,3) (1: Institute of Photonic Technologies (LPT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Erlangen Graduate School in Advanced Optical Technologies (SAOT), Germany; 3: Bayerisches Laserzentrum GmbH (blz), Germany) Influence of preheating temperature and carbon content on crack formation during Laser Beam Melting of AISI H11 tool steel |
| Lorusso, Massimo (1); Manfredi, Diego (1); Calignano, Flaviana (1); Ambrosio, Elisa Paola (1); Aversa, Alberta (2); Marchese, Giulio (2); Ugues, Daniele (2); Pavese, Matteo (2); Fino, Paolo (1,2) (1: Center for Sustainable Futures@Polito, Istituto Italiano di Tecnologia, Italy; 2: Department of Applied Science and Technology, Politecnico di Torino, Italy) Understanding wear and friction behavior of DMLS Aluminum Matrix Composites by nanoscratching |
| Pobel, Christoph (1,2) (1: Materials Science (MWT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Innovative processing strategies for selective electron beam melting of Ti-6Al-4V and IN718 |
| Burns, Neil; Molyneux, Anthony; Geekie, Louise (Croft Additive Manufacturing Limited, Risley Warrington, United Kingdom) Surface Finishing of metal AM parts |
| Merklein, Marion (1,4); Dubjella, Patrick (1,4); Schaub, Adam (1,4); Butzhammer, Lorenz (2,3,4); Schmidt, Michael (2,3,4) (1: Institute of Manufacturing Technology (LFT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Institute of Photonic Technologies (LPT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 3: Erlangen Graduate School in Advanced Optical Technologies (SAOT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 4: Collaborative Research Center 814 - Additive Manufacturing, Germany) Interaction of Additive Manufacturing and forming |
| Additive Manufacturing Process - Polymers |
| Zäh, Ralf-Kilian (ZeMA - Zentrum für Mechatronik und Automatisierungstechnik gGmbH, Germany) Modern multi - material - 3D - manufacturing with separate toner layer structure production and component assembly |
| Fischer, Matthias; Schöppner, Volker (Paderborn University, Germany) Fatigue behavior of ultem 9085 parts manufactured by fused deposition modeling |
| Kaufhold, Julia; Gauser, Tony; Kuhnert, Benjamin (Institut für Holztechnologie Dresden gGmbH, Germany) Mechanical properties of 3D-printed wood-plastic-composites depending on process parameters |
| Drexler, Maximilian (1,2); Lanzl, Lydia (1,2); Wudy, Katrin (1,2); Drummer, Dietmar (1,2) (1: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Institute of Polymer Technology (LKT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Analysis of time dependent thermal properties for high heating rates in selective laser sintering |
| Yoo, In Seong; Stauber, Simon; Franke, Jörg (Institute for Factory Automation and Production Systems (FAPS), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Spatial mapping of temperature distribution in heated build envelope of a desktop 3D-printer |
| Pilipović, Ana; Zrakić, Igor (Faculty of Mechanical Engineering and Naval Architecture, Croatia) Influence of processing parameters on the mechanical properties of FDM products |
| Wegner, Andreas (University of Duisburg-Essen, Germany) Processing conditions and aging effects of a new polypropylene material for the laser sintering process |
| Lohn, Johannes (University of Paderborn, Germany) Laser sintering of PA6 |
| Wudy, Katrin (1,2); Lanzl, Lydia (1,2); Greiner, Sandra (1); Drexler, Maximilian (1,2); Drummer, Dietmar (1,2) (1: Institute of Polymer Technology (LKT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Selective laser sintering of a polypropylene polyamide 12 blend: Bulk and component properties |
| Niese, Bernd (1); Amend, Philipp (1); Roth, Stephan (1,2); Schmidt, Michael (1,2,3) (1: Bayerisches Laserzentrum GmbH, Germany; 2: SAOT Erlangen Graduate School in Advanced Optical Technologies, Germany; 3: University of Erlangen-Nürnberg, Institute of Photonic Technologies, Germany) Generation of electrical conductive structures with high current capacity on Fused Deposition Modeling parts |
| Applications of Additive Manufacturing |
| Hallmann, Sina (Technische Universität Hamburg, Germany) Process development for hybrid punching dies by Selective Laser Melting of steel material |
| Kopf, Robin; Lingen, Alexander; Lanza, Gisela (Karlsruhe Institute of Technology (KIT), Germany) Developing laser metal fusion towards a cost efficient series production |
| Steinwender, Arko (1,2); Kritzinger, Werner (1,2) (1: Fraunhofer Austria Research GmbH, Austria; 2: Vienna University of Technology, Austria) Systematic approach for the identification of new industrial application fields for AMT |
| Gebauer, Mathias (1); Müller, Bernhard (1); Polster, Stefan (1); Spierings, Adriaan (2); Stoll, Philipp (2); Feld, Tobias (3); Klinger, Marcel (4); Zurbrügg, Andreas (5) (1: Fraunhofer Institute for Machine Tools and Forming Technology, Germany; 2: inspire AG, Switzerland; 3: BRAUN CarTec GmbH, Germany; 4: Gut Metallumformung AG, Switzerland; 5: Ringele AG, Switzerland) High performance sheet metal forming tooling by Additive Manufacturing |
| Graf, Gregor; Donisi, Sven (Rosswag GmbH, Germany) Additive manufacturing in small and medium-sized enterprises - The Forge-SLM-Hybrid |
| Pfister, Andreas (1); Fischer, Sybille (1); Galitz, Verena (1); Lyons, Brett (2); Robinson, Christopher (2); Kubiak, Steven (3); Booth, Rick (4) (1: EOS GmbH, Germany; 2: The Boeing Company, USA; 3: Stratasys Direct Manufacturing, USA; 4: Advanced Laser Materials, LLC; USA) Laser sintering of carbon fiber filled PEKK: A new high-performance composite tailored for aerospace applications |
| Hiller, Simon (1); Moisa, Michelle (2); Morar, Dominik (2); Kemper, Hans-Georg (2); Lasi, Heiner (1) (1: Ferdinand-Steinbeis-Institut, Germany; 2: University of Stuttgart, Germany) Implementation approaches for Additive Manufacturing enabled value chains - an exploration |
| Nemecek, Stanislav (1,2); Wágner, František (1) (1: Matex PM, Czech Republic; 2: Raptech, Czech Republic) Properties of dies produced by additive manufacturing |
| Singh, Amit Kumar (1); Amirfazli, Alidad (2) (1: MNIT Jaipur, India; 2: York University, Canada) 3D printing technologies for microfluidic device fabrication: A review paper |
| Quality Assurance for Additive Manufacturing |
| Paramasivam, Vinothkumar; Santhanakrishnan, Soundarapandian (Indian institute of Technology Madras, Chennai, India) Vision based control system for quality improvement of additively-manufactured parts |
| Fulga, Simina (1,2); Davidescu, Arjana (2); Effenberger, Ira (1); Verl, Alexander (3) (1: Fraunhofer Institute for Manufacturing Engineering and Automation IPA, Germany; 2: Politehnica University Timisoara, Romania; 3: Institute for Control Engineering of Machine Tools and Manufacturing Systems, Germany) Tasks for in-line quality control and in-situ optimisation of Additive Manufacturing Powder Bed Fusion Processes |
| Fulga, Simina (1,2); Davidescu, Arjana (2); Effenberger, Ira (1); Verl, Alexander (3) (1: Fraunhofer Institute for Manufacturing Engineering and Automation IPA, Germany; 2: Politehnica University Timisoara, Romania; 3: Institute for Control Engineering of Machine Tools and Manufacturing Systems, Germany) In-line Quality Control System for a reliable Additive Manufacturing -layer by layer inspection |
| Hassler, Ulf (1); Grulich, Tobias (1); Seifert, Lars (1); Kostka, Günther (1); Hentschel, Oliver (2) (1: Fraunhofer IIS, Germany; 2: Institute of Photonic Technologies (LPT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Multimodal in-situ monitoring and defect detection for laser metal deposition by using infrared thermography and sheet-of-light imaging |
| Heinl, Martin (1,2); Hausotte, Tino (1,2); Galovskyi, Bogdan (1,2) ((1: Institute of Manufacturing Metrology (FMT), Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 2: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany) Dimensional and surface measurements of additive manufactured workpieces |
| Chivel, Yuri (MerPhotonics, France) Optical monitoring and control in additive technologies |
| Fuchs, Lukas; Grebner, Martin (EOS GmbH Electro Optical Systems, Germany) Innovation in process monitoring – How to achieve real in-process quality control in Direct Metal Laser Sintering (DMLS) |
| Marmor, Thomas; Grebner, Martin (EOS GmbH Electro Optical Systems, Germany) Best practices: AM Quality validation for restricted industries |
| Additive Manufacturing Technologies |
| Grguraš, Damir; Kramar, Davorin; Homar, David; Pusavec, Franci; Kopac, Janez (Faculty of Mechanical Engineering, Ljubljana, Slovenia) Optimization of the technological parameters in the hybrid manufacturing of 3D printing and milling |
| Chivel, Yuri (MerPhotonics, France) New approache in selective laser cladding |
| Kloke, Agnes; Neff, Martin; Dr. Duffner, Eberhard (ARBURG, Germany) ARBURG Plastic Freeforming and the resulting part quality |
| Graf, Benjamin (1); Petrat, Torsten (1); Gumenyuk, Andrey (1,4); Schuch, Michael (3); Rethmeier, Michael (1,2,4) (1: Fraunhofer IPK, Germany; 2: Technische Universität Berlin, Germany; 3: Wehrwissenschaftliches Institut für Werk- und Betriebsstoffe (WIWeB); 4: Bundesanstalt für Materialforschung und -prüfung (BAM), Germany) Combined laser additive manufacturing with powderbed and powder nozzle for turbine parts |
| Chivel, Yuri (MerPhotonics, France) Selective laser sintering/melting of multi-material parts |
| Hopmann, Christian; Lammert, Nicolai (Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk an der RWTH Aachen, Germany) Integrated combination of additive and subtractive manufacturing for thermoplastic materials |
| Zhang, Wei; Priefer, Marian; Olenina, Mariia; Ossenbrink, Ralf; Michailov, Vesselin (Brandenburg University of Technology Cottbus - Senftenberg, Germany) Additive manufacturing by laser beam build-up welding |
| Stichel, Thomas (1,2); Laumer, Tobias (1,2); Amend, Philipp (1,2); Roth, Stephan (1,2,3) (1: Bayerisches Laserzentrum GmbH (blz), Germany; 2: Collaborative Research Center 814 - Additive Manufacturing, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany; 3: Erlangen Graduate School in Advanced Optical Technologies (SAOT), Germany) Multi-material deposition of polymer powders with vibrating nozzles inside laser beam melting machines |
| Erler, Martin; Ebert, Robby; Gronau, Stafan; Horn, Matthias; Kloetzer, Sascha; Exner, Horst (Laserinstitut Hochschule Mittweida, Germany) High rate micro cladding |
| Schwarzer, Eric; Scheithauer, Uwe; Richter, Hans-Jürgen; Moritz, Tassilo (Fraunhofer IKTS, Germany) Exploration of new possibilities in Additive Manufacturing by using lithography-based ceramic manufacturing (LCM) |
| Scheithauer, Uwe; Schwarzer, Eric; Weingarten, Steven; Richter, Hans-Jürgen; Moritz, Tassilo (Fraunhofer IKTS, Germany) Thermoplastic 3D-Printing (T3DP) – An additive manufacturing process for single- and multi-material components |
| Baumgartner, Sonja (1); Schönherr, Julia-Anna (1); Schedle, Andreas (2); Stampfl, Jürgen (1) (1: TU Wien, Austria; 2: University Clinic of Dentistry Vienna, Austria) Precision of stereolithography-based additive manufactured ceramic parts |
